Instant vs Storage Water Heater in Singapore: How to Choose
Last updated: 16 November 2026
Quick answer: An instant water heater has no tank. It heats water as it flows through, so it does not run out the way a tank does, and the unit is small. How warm the water gets depends on how much water flows through it. A storage water heater heats a tank of water in advance and keeps it hot, so it can feed more than one outlet, but it holds only as much hot water as its tank size. Choose instant for a compact unit at one shower where your water flow meets the listed minimum; choose storage when you have room for the tank and want hot water at more than one tap. This guide covers electric models, the two types we install.
Instant vs storage water heater: side by side
The two types differ in how they heat, how much hot water is ready and how much wall space they take.
| Instant water heater | Storage water heater | |
|---|---|---|
| How it heats | Heats water as it flows through; no tank | Heats a tank of water and holds it at the set temperature |
| Hot water supply | Does not run out like a tank; how warm it gets depends on the flow, within its listed flow range | Limited to the tank volume, then waits to reheat |
| Size on our listings | Mistral MSH88P: 395 mm high, 230 mm wide, 70 mm deep (88 mm with knob) | Mowe 15L: 395 x 395 x 325 mm; Mistral 35L: L605 x H380 mm |
| Figures to check | Minimum water flow, e.g. 2.0 Litres/min on the Mistral MSH99 | Tank capacity, listed from 15L to 35L |
| Suits | A single shower point | A household sharing hot water between outlets |
How an instant water heater works
Cold water enters the unit, passes over a heating element and leaves hot, so there is no tank to empty and no tank to wait for.
Two things to check on the listing:
- Water flow. The Mistral MSH99 and MSH88P listings both mention a “Built-in auto water flow-sensor device switch”. The MSH99 lists “Min. Water Flow Rate: 2.0 Litres/min”, and the MSH88P lists “Min. Water Flow Rate: 3.0 Litres/min” and “Max. Water Flow Rate: 7.0 Litres/min”. If your shower runs weakly, check the minimum first. The more water flows through, the less each litre is heated, which is why the listings give flow figures.
- Water pressure. The MSH99 lists “Min. Water Pressure: 10 kPa(0.1Bar)” and “Max. Water Pressure: 0.6 MPa (6 Bar)”, and the page says it is “Suitable for High and Low Water Pressure”.
Some of our instant models come with a rain shower and a DC pump. The MSH99 lists “With Rain Shower”, and the MSH88P lists a “Rainshower column” and “DC silent inverter pump technology”. Both list a built-in ELCB (earth leakage circuit breaker). Browse the instant heaters to compare them.
How a storage water heater works
A storage heater warms water in an insulated tank, keeps it at the temperature set on its thermostat, and refills the tank with cold water as you draw hot water out.
The tank volume sets how much hot water is ready at once. When it is used up, you wait for the tank to reheat. Our listings give no heat-up time, so this guide gives none either.
The listings state their safety and build details. The Mistral MSWHZ35CG lists an “Adjustable automatic thermostat (25β-75β)” and “Multi-function safety protection (Over-temperature, over-pressure, dry heating cut off)”. The Mowe 15L lists an “Enamel coated steel tank” and a “Multi-function safety valve”. See all storage heaters.
How to choose: bathroom layout, household size and how you use hot water
Three things decide it.
- Your bathroom layout. Where would the unit go, and how many outlets must it reach? An instant unit is a small wall box, and a storage tank needs a spot that fits its listed size, so measure first. One shower points to instant. Hot water shared between a shower and a basin or kitchen tap points to storage, which draws from one tank.
- Your household size. A tank holds only as much hot water as its listed size, so more people showering close together use it up sooner. An instant heater does not run out the way a tank does, but it serves the outlet it is fitted to.
- How you shower and use hot water. Showers one after another can empty a small tank, while use spread across the day suits a tank well. For an instant heater, compare your shower’s flow with the minimum on the listing before you order.
Which type suits which household?
These are starting points, not verdicts. The right answer depends on your own bathroom.
- You live alone or with one other person. Hot water is often drawn at one point at a time, so check space and flow first. A compact instant unit at the shower and a small storage tank are both worth comparing.
- Several bathrooms are used at the same time. Check how many outlets each unit would have to reach. An instant heater serves the outlet it is fitted to, and a tank is limited to its listed volume, so tell us your layout when you ask about installation.
- You want a rain shower. Several of our instant models bundle one with the heater, so you buy heater and shower together. Check the listed flow range and pressure on the model first. The storage listings we read give no flow figure.
Instant or storage water heater for an HDB flat?
In an HDB flat the practical questions are space and installation, not which type is “better”.
Measure the spot where the unit would go and compare it with the sizes on the listings. A 15L storage tank such as the Mowe MW-15SH is listed at 395 x 395 x 325 mm, a 35L tank at L605 x H380 mm, and an instant unit such as the MSH88P at 395 mm high, 230 mm wide and 70 mm deep (88 mm with its knob). A full tank weighs more than the listed net weight because of the water inside it, so the wall it hangs on needs to carry that weight. Include the wall in the photos you send with your enquiry.
Send us photos of the bathroom and the model you are considering, and our team will reply with a quotation.
What our listings show
The quoted text below is as written on each product page, read on 16 November 2026. Check the live page for current stock and options.
- Mistral MSH99 Instant Heater: “3300W”; “Min. Water Flow Rate: 2.0 Litres/min”; “Min. Water Pressure: 10 kPa(0.1Bar)”; “Max. Water Pressure: 0.6 MPa (6 Bar)”; “With Rain Shower”; “Built-in 15 mA sensitivity electronic ELCB”; “Splash Proof Protection IP25”.
- Mistral MSWHZ35CG 35L Storage Water Heater: “Capacity : 35L”; “Rated Power (W) : 3000”; “Rated Pressure : 0.8 mpa”; “Temperature Control : Adjustable automatic thermostat (25β-75β), safety protection”; “IP Rating : IPX4”; “Product Dimension : L605*H380mm”; “Net Weight : 16.6 KGS”.
- Mowe 15L Storage Water Heater MW-15SH: “15L Storage Heater”; “Enamel coated steel tank”; “Withstand 8 bar water pressure”; “Multi-function safety valve”; “Product L395 x W395 x H325mm”; “N.W : 9.8kg”. The page does not list its wattage.
Rated power on a listing is how much power the heater draws while it heats. It is not a monthly electricity cost, which depends on how long you run it, so this guide gives no cost figures. Browse the full water heater range.
Water heater installation
We arrange professional installation of electric water heaters, instant or storage, new or replacement. Gas water heaters are installed by City Energy; see our gas vs electric water heater guide for that choice.
On our water heater installation page, the process is that you enquire, we send a quotation, and you confirm it before any work is scheduled. Depending on your site, additional charges may apply, such as piping adjustment or wiring extension; our team confirms the full quotation before any work is scheduled. Installation-only jobs for products bought elsewhere exclude product warranty.
To ask about a heater or an installation, message us on WhatsApp at +65 9688 6676.
See them in a showroom
Visit one of our 5 showrooms, and call the branch first to check which water heaters are on display. Not sure which type fits your bathroom? Send our team a photo of the space on WhatsApp and we will help work out what fits.
FAQ
What is the difference between an instant and a storage water heater?
An instant water heater has no tank and heats water as it flows through, so it does not run out the way a tank does. A storage water heater heats a tank of water in advance and keeps it hot, so the hot water ready at one time is limited to the tank size.
Should I choose an instant or a storage water heater for an HDB flat?
It depends on space and on how many outlets need hot water. An instant heater is a small wall unit for one shower, while a storage tank needs a spot that fits its listed size. Send our team a photo of your bathroom and we will help work out what fits.
Does an instant water heater need a minimum water flow?
Yes, the listings state one. The Mistral MSH99 lists “Min. Water Flow Rate: 2.0 Litres/min” and the MSH88P lists 3.0 to 7.0 Litres/min. If your shower flow is weak, check the minimum on the model before you order.
Can a storage water heater run out of hot water?
Yes. It holds only the volume of its tank, listed on our site from 15L to 35L, and then you wait for it to reheat. Our listings give no reheat time, so ask us if this matters for your household.
Do you install electric water heaters?
Yes. We arrange professional installation of instant and storage electric water heaters, new or replacement. Gas water heaters are installed by City Energy. Message us on WhatsApp at +65 9688 6676 to ask.
